Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16.5 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C100M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8X2C100M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216620137 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$16,667.92
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16.5 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C080M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 80k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8X2C080M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216620131 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$16,591.33
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C100M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8V2C100M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619564 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$17,485.59
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C080M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 80k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8V2C080M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216533322 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$17,374.52
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9X2C100U5PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque blower motor for consistent, dependable heating and ENERGY STAR® certified efficiency. Stainless steel heat exchanger and insulated cabinet. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S9X2C100U5PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619572 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$18,360.71
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9V2C100U5VSB Furnace: The Trane S9V2 is a 97% AFUE variable-speed gas furnace with a variable-speed blower and draft inducer for quiet, precise heating and long-term energy efficiency. Stainless steel heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S9V2C100U5VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619570 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$19,528.81
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C100M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 100k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8X2C100M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568127 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$15,827.26
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C080M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8X2C080M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568131 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$15,750.67
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C100M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 100k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8V2C100M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568147 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$16,644.93
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C080M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8V2C080M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568143 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$16,533.86
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9X2C080U5PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque blower motor for consistent, dependable heating and ENERGY STAR® certified efficiency. Stainless steel heat exchanger and insulated cabinet. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S9X2C080U5PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568141 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$17,405.16
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9V2C080U5VSB Furnace: The Trane S9V2 is a 97% AFUE variable-speed gas furnace with a variable-speed blower and draft inducer for quiet, precise heating and long-term energy efficiency. Stainless steel heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S9V2C080U5VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568151 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$18,621.13
