Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7036 Air Conditioner: High-efficiency 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2B080M4PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 80k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S8X2B080M4PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567561 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$14,961.73
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7036 Air Conditioner: High-efficiency 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2B060M4PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S8X2B060M4PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567557 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$14,852.56
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7036 Air Conditioner: High-efficiency 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2B080M4PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 80k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S8V2B080M4PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567513 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$15,716.19
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7036 Air Conditioner: High-efficiency 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2B060M4PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S8V2B060M4PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567517 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$15,607.03
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7036 Air Conditioner: High-efficiency 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9X2B060U4PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque blower motor for consistent, dependable heating and ENERGY STAR® certified efficiency. Stainless steel heat exchanger and insulated cabinet. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S9X2B060U4PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567525 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$16,461.09
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7036 Air Conditioner: High-efficiency 3-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9V2B060U3VSB Furnace: The Trane S9V2 is a 97% AFUE variable-speed gas furnace with a variable-speed blower and draft inducer for quiet, precise heating and long-term energy efficiency. Stainless steel heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 60k output. 5TXCB006 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7036 Condenser Stages Multi-Speed Furnace Model S9V2B060U3VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB006 Coil Cabinet Size B AHRI 216567569 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$17,397.50
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7024 Air Conditioner: High-efficiency 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2B060M4PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 60k output. 5TXCB003 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S8X2B060M4PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 216619680 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$13,979.36
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7024 Air Conditioner: High-efficiency 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2A040M3PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 40k output. 5TXCA002 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet A systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S8X2A040M3PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 216566621 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$13,854.90
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7024 Air Conditioner: High-efficiency 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2B060M4PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 60k output. 5TXCB003 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S8V2B060M4PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 60k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 216566649 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$14,733.83
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7024 Air Conditioner: High-efficiency 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2A040M3PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 40k output. 5TXCA002 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet A systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S8V2A040M3PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 216566637 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$14,515.55
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7024 Air Conditioner: High-efficiency 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9X2B040U3PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque blower motor for consistent, dependable heating and ENERGY STAR® certified efficiency. Stainless steel heat exchanger and insulated cabinet. 40k output. 5TXCB003 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S9X2B040U3PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 216566639 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$15,367.68
Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7024 Air Conditioner: High-efficiency 2-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9V2B040U3VSB Furnace: The Trane S9V2 is a 97% AFUE variable-speed gas furnace with a variable-speed blower and draft inducer for quiet, precise heating and long-term energy efficiency. Stainless steel heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 40k output. 5TXCB004 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet B systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7024 Condenser Stages Multi-Speed Furnace Model S9V2B040U3VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB004 Coil Cabinet Size B AHRI 216566673 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$16,371.10
