Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4060A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A951X120DU5S Backup Furnace: A higher-efficiency, reliable 95% AFUE gas furnace built to Trane Technologies quality standards, using a variable-speed ECM blower and two-stage gas valve for quieter operation and greater energy savings than standard-efficiency models. 5TXC Cased Aluminum Evaporator Coil 5TXCD008AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4060A Condenser Stages Single Furnace Model A951X120DU5S Furnace Stages Single-Stage Furnace Efficiency 95% Coil Model 5TXCD008AS Heat Source Gas AHRI 215486974 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4048A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A951X100CU5S Backup Furnace: A higher-efficiency, reliable 95% AFUE gas furnace built to Trane Technologies quality standards, using a variable-speed ECM blower and two-stage gas valve for quieter operation and greater energy savings than standard-efficiency models. 5TXC Cased Aluminum Evaporator Coil 5TXCC009AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4048A Condenser Stages Single Furnace Model A951X100CU5S Furnace Stages Single-Stage Furnace Efficiency 95% Coil Model 5TXCC009AS Heat Source Gas AHRI 215486882 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4042A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A951X080CU5S Backup Furnace: A higher-efficiency, reliable 95% AFUE gas furnace built to Trane Technologies quality standards, using a variable-speed ECM blower and two-stage gas valve for quieter operation and greater energy savings than standard-efficiency models. 5TXC Cased Aluminum Evaporator Coil 5TXCC007AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4042A Condenser Stages Single Furnace Model A951X080CU5S Furnace Stages Single-Stage Furnace Efficiency 95% Coil Model 5TXCC007AS Heat Source Gas AHRI 215486662 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4036A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A951X080BU4S Backup Furnace: A higher-efficiency, reliable 95% AFUE gas furnace built to Trane Technologies quality standards, using a variable-speed ECM blower and two-stage gas valve for quieter operation and greater energy savings than standard-efficiency models. 5TXC Cased Aluminum Evaporator Coil 5TXCB006AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4036A Condenser Stages Single Furnace Model A951X080BU4S Furnace Stages Single-Stage Furnace Efficiency 95% Coil Model 5TXCB006AS Heat Source Gas AHRI 215486404 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4030A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A951X060BU4S Backup Furnace: A higher-efficiency, reliable 95% AFUE gas furnace built to Trane Technologies quality standards, using a variable-speed ECM blower and two-stage gas valve for quieter operation and greater energy savings than standard-efficiency models. 5TXC Cased Aluminum Evaporator Coil 5TXCB004AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4030A Condenser Stages Single Furnace Model A951X060BU4S Furnace Stages Single-Stage Furnace Efficiency 95% Coil Model 5TXCB004AS Heat Source Gas AHRI 215486112 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4024A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A951X040BU3S Backup Furnace: A higher-efficiency, reliable 95% AFUE gas furnace built to Trane Technologies quality standards, using a variable-speed ECM blower and two-stage gas valve for quieter operation and greater energy savings than standard-efficiency models. 5TXC Cased Aluminum Evaporator Coil 5TXCB004AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4024A Condenser Stages Single Furnace Model A951X040BU3S Furnace Stages Single-Stage Furnace Efficiency 95% Coil Model 5TXCB004AS Heat Source Gas AHRI 215485914 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4018A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A951X040BU3S Backup Furnace: A higher-efficiency, reliable 95% AFUE gas furnace built to Trane Technologies quality standards, using a variable-speed ECM blower and two-stage gas valve for quieter operation and greater energy savings than standard-efficiency models. 5TXC Cased Aluminum Evaporator Coil 5TXCB003AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4018A Condenser Stages Single Furnace Model A951X040BU3S Furnace Stages Single-Stage Furnace Efficiency 95% Coil Model 5TXCB003AS Heat Source Gas AHRI 215485708 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4060A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A801X120DM5S Backup Furnace: An entry-level, dependable 80% AFUE gas furnace built to Trane Technologies quality standards, featuring a constant-torque ECM blower and multi-position (upflow/downflow/horizontal) cabinet design for straightforward installation. 5TXC Cased Aluminum Evaporator Coil 5TXCD010AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4060A Condenser Stages Single Furnace Model A801X120DM5S Furnace Stages Single-Stage Furnace Efficiency 80% Coil Model 5TXCD010AS Heat Source Gas AHRI 215486980 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4048A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A801X100CM5S Backup Furnace: An entry-level, dependable 80% AFUE gas furnace built to Trane Technologies quality standards, featuring a constant-torque ECM blower and multi-position (upflow/downflow/horizontal) cabinet design for straightforward installation. 5TXC Cased Aluminum Evaporator Coil 5TXCC009AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4048A Condenser Stages Single Furnace Model A801X100CM5S Furnace Stages Single-Stage Furnace Efficiency 80% Coil Model 5TXCC009AS Heat Source Gas AHRI 215486894 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4042A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A801X080BM4S Backup Furnace: An entry-level, dependable 80% AFUE gas furnace built to Trane Technologies quality standards, featuring a constant-torque ECM blower and multi-position (upflow/downflow/horizontal) cabinet design for straightforward installation. 5TXC Cased Aluminum Evaporator Coil 5TXCB006AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4042A Condenser Stages Single Furnace Model A801X080BM4S Furnace Stages Single-Stage Furnace Efficiency 80% Coil Model 5TXCB006AS Heat Source Gas AHRI 215486618 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4036A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A801X060BM4S Backup Furnace: An entry-level, dependable 80% AFUE gas furnace built to Trane Technologies quality standards, featuring a constant-torque ECM blower and multi-position (upflow/downflow/horizontal) cabinet design for straightforward installation. 5TXC Cased Aluminum Evaporator Coil 5TXCB006AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4036A Condenser Stages Single Furnace Model A801X060BM4S Furnace Stages Single-Stage Furnace Efficiency 80% Coil Model 5TXCB006AS Heat Source Gas AHRI 215486422 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Ameristar, offered by McKinney HVAC, is a trusted name in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Ameristar products meet top standards in residential heating and cooling. Whether upgrading or installing new, Ameristar provides advanced solutions to keep your home comfortable year-round. What's Included: Ameristar A5HP4030A Condenser: A budget-friendly, reliable single-stage heat pump built to Trane Technologies quality standards, delivering up to 14.3 SEER2 / 7.5 HSPF2 efficiency with R-454B refrigerant for both cooling and cold-climate heating in one outdoor unit. Ameristar A801X060BM4S Backup Furnace: An entry-level, dependable 80% AFUE gas furnace built to Trane Technologies quality standards, featuring a constant-torque ECM blower and multi-position (upflow/downflow/horizontal) cabinet design for straightforward installation. 5TXC Cased Aluminum Evaporator Coil 5TXCB004AS Evaporator Coil: The American Standard 5TXC is an aluminum cased multi-position (upflow/downflow/horizontal) evaporator coil engineered for use with Silver-series condensers and heat pumps, sized 1.5-5 ton, compatible with R-454B refrigerant systems. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Dual Fuel Kit (Heat Pump Condenser & Coil + Backup Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model A5HP4030A Condenser Stages Single Furnace Model A801X060BM4S Furnace Stages Single-Stage Furnace Efficiency 80% Coil Model 5TXCB004AS Heat Source Gas AHRI 215486120 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less