The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: The Goodman GSXS6S is a two-stage air conditioner rated up to 17.2 SEER2, featuring a variable-speed swing compressor, a quiet digitally commutated fan motor, and a high-density compressor sound blanket for reliable, low-noise cooling. GMVC80 Gas Furnace: is a two-stage, variable-speed gas furnace with up to 80% AFUE efficiency, featuring an advanced variable-speed blower motor for quiet, consistent airflow and dependable heating performance. The Goodman CHPE evaporator coil: a cased horizontal coil with all-aluminum construction, built for efficient, corrosion-resistant performance in horizontal installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman's quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy deployment and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-optimized cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment. Trust Goodman for consistent comfort and performance season after season. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 17.2 Seer2 Condenser Model GSXS6S1810A Condenser Stages Variable Speed Furnace Model GMVC800603BNA Furnace Stages Two-Stage/Comm Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPE2430B4 Coil Cabinet Size B AHRI 213349239 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Unit Replacement (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: The Goodman GXV6S is a variable-speed inverter air conditioner delivering up to 18 SEER2 efficiency with continuous compressor modulation for precise comfort control. Built for R-32 refrigerant with a side-discharge design, it is backed by a 10-year parts and 10-year unit replacement warranty when registered. GRVT80 Gas Furnace: provides enhanced comfort with a two-stage gas valve and variable-speed blower motor for precise temperature control and improved energy efficiency. Its durable build, quiet operation, and flexible installation make it dependable for consistent home heating year-round. The Goodman CAPEA evaporator coil: a cased upflow/downflow coil with a factory-installed EEV and all-aluminum construction, engineered for corrosion resistance and efficient heat transfer in vertical installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Performance: Built with Goodman's quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Engineered for easy deployment and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective solution for year-round comfort. Combining energy-optimized cooling, reliable heating, and enhanced heat transfer, the Goodman condenser, furnace, and coil work together to create an ideal indoor environment. Trust Goodman for consistent comfort and performance season after season. Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 17.2 Seer2 Condenser Model GXV6S1810A Condenser Stages Variable Speed Furnace Model GRVT800603BNA Furnace Stages Two-Stage/Variable Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CAPEA2418B3 Coil Cabinet Size B AHRI 215490257 Refrigerant R-32 Warranty 10-Year Parts, 10-Year Unit Replacement (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET SPEC SHEET

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16.5 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C100M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8X2C100M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216620137 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16.5 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C080M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 80k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16.5 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8X2C080M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216620131 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C100M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8V2C100M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619564 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C080M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 80k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S8V2C080M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216533322 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9X2C100U5PSB Furnace: The Trane S9X2 is a 96% AFUE two-stage gas furnace with an ECM Constant Torque blower motor for consistent, dependable heating and ENERGY STAR® certified efficiency. Stainless steel heat exchanger and insulated cabinet. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S9X2C100U5PSB Furnace Stages Two-Stage Furnace Efficiency 96% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619572 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7060 Air Conditioner: High-efficiency 5-Ton multi-speed central air conditioner delivering up to 16 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S9V2C100U5VSB Furnace: The Trane S9V2 is a 97% AFUE variable-speed gas furnace with a variable-speed blower and draft inducer for quiet, precise heating and long-term energy efficiency. Stainless steel heat exchanger, insulated cabinet, and Comfort-R™ dehumidification. 100k output. 5TXCC009 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 16 Condenser Model 5TTR7060 Condenser Stages Multi-Speed Furnace Model S9V2C100U5VSB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 97% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 216619570 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C100M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 100k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8X2C100M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568127 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8X2C080M5PSC Furnace: The Trane S8X2 is an 80% AFUE two-stage gas furnace with a nine-tap multi-speed blower motor providing reliable heating with better temperature control and quieter operation. Insulated cabinet and durable heat exchanger for lasting performance. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8X2C080M5PSC Furnace Stages Two-Stage Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568131 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C100M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 100k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8V2C100M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 100k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568147 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and reliable comfort with a complete Trane 5TTR7 Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR7048 Air Conditioner: High-efficiency 4-Ton multi-speed central air conditioner delivering up to 17.1 SEER2 cooling efficiency with durable, quiet operation for reliable comfort in extreme temperatures. Inverter-driven compressor, R-454B refrigerant, and a 10-year parts and compressor limited warranty when registered. S8V2C080M5PCB Furnace: The Trane S8V2 is an 80% AFUE variable-speed gas furnace with a variable-speed blower motor for smooth, efficient airflow and reliable heating. Insulated cabinet and durable heat exchanger for long-term performance. 80k output. 5TXCC007 Evaporator Coil: The Trane 5TXC Comfort™ Coil Enhances heat transfer for heating and cooling in Cabinet C systems with corrosion-resistant construction for lasting performance. R-454B refrigerant compatible, factory-installed TXV. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas System Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and furnish a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 17.1 Condenser Model 5TTR7048 Condenser Stages Multi-Speed Furnace Model S8V2C080M5PCB Furnace Stages Two-Stage Variable Speed Furnace Efficiency 80% AFUE Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 216568143 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor(When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less