Experience efficient and reliable comfort with a complete Trane Gas HVAC System from McKinney HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, built for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with quiet operation and consistent performance in extreme temperatures. S8X2 Gas Furnace: Provides energy-efficient heating with a two-stage gas valve for better temperature control and quieter operation, ensuring dependable warmth during peak demand. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our deployment causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4060 Condenser Stages Single Furnace Model S8X2C080M5PSCA Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC007 Coil Cabinet Size C AHRI 215559266 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$13,858.73
Experience productive, reliable comfort with a complete Trane Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for year-round heating and cooling with power efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S8V2 Gas Furnace: Provides comfort and efficiency with a variable-speed blower motor and two-stage gas valve, ensuring consistent temperatures, quiet operation, and improved indoor air quality. It adapts to your home's needs for energy savings year-round. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full unit start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our deployment causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4060 Condenser Stages Single Furnace Model S8V2C080M5PCAA Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215559290 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$14,781.72
Experience efficient and reliable comfort with a complete Trane Gas HVAC System from McKinney HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a top-tier indoor coil, designed for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S9X1 Gas Furnace Provides powerful, consistent heating with a high-efficiency single-stage gas valve and durable construction, enhancing energy savings and indoor comfort. 5TXC Coil: Optimizes heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and conventional installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the typical disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4060 Condenser Stages Single Furnace Model S9X1C080U5PSBA Furnace Stages Single Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215559306 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$15,013.44
Experience efficient and trustworthy comfort with a complete Trane Gas HVAC System from McKinney HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for consistent year-round temperature and cooling with energy efficiency and durability. What's Included: 5TTR40 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable comfort in extreme temperatures. S9V2 Gas Furnace: Offers efficient, ultra-quiet heating with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for optimal airflow and energy savings. 5TXC Coil: Enhances heat transfer for warming and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model 5TTR4060 Condenser Stages Single Furnace Model S9V2C080U5VSBB Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215830639 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$16,868.98
Experience efficient and reliable comfort with a complete Trane Gas HVAC System from McKinney HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-efficiency indoor coil, designed for consistent year-round heating and cooling with fuel efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S8X1 Gas Furnace: Delivers powerful, steady heat with a single-stage gas valve, focusing on efficiency and long-term reliability. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5018 Condenser Stages Single Furnace Model S8X1B040M2PSCA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215472733 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$11,639.32
Experience efficient and reliable comfort with a complete Trane Gas HVAC System offered by McKinney HVAC. This unit includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, crafted for consistent heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for stable performance in extreme temperatures. S8X2 Gas Furnace: Provides energy-efficient heating with a two-stage gas valve for better temperature control and quieter operation, ensuring dependable warmth during peak demand. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, substitution, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5018 Condenser Stages Single Furnace Model S8X2A040M3PSCA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 215472707 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$12,169.76
Experience effective and reliable comfort with a complete Trane Gas HVAC System from McKinney HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for consistent heat and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S8V2 Gas Furnace: Provides comfort and efficiency with a variable-speed blower motor and two-stage gas valve, ensuring consistent temperatures, quiet operation, and improved indoor air quality. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, exchange, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5018 Condenser Stages Single Furnace Model S8V2A040M3PCBA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA003 Coil Cabinet Size A AHRI 215472709 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$12,830.42
Experience efficient and reliable convenience with a complete Trane Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a excellent indoor coil, designed for consistent heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S9X1 Gas Furnace Provides powerful, consistent heating with a high-efficiency single-stage gas valve and resilient construction, enhancing energy savings and indoor comfort. 5TXC Coil: Optimizes heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and offer a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5018 Condenser Stages Single Furnace Model S9X1B040U3PSBA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215472757 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$13,096.59
Experience efficient, reliable comfort with a finish Trane Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, dependable gas furnace, and high-performance indoor coil for consistent heating and cooling, maximizing fuel efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S9V2 Gas Furnace: Offers top efficiency and ultra-quiet, precise comfort with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is Electricity STAR® certified, ensuring excellent heating, airflow, and energy savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our deployment causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5018 Condenser Stages Single Furnace Model S9V2B040U3VSBB Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215472751 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$14,661.08
Experience efficient and reliable comfort with a complete Trane Gas HVAC System from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-operation indoor coil, designed for steady heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable comfort in extreme temperatures. S8X1 Gas Furnace: Provides powerful, consistent heating with a single-stage gas valve, focusing on efficiency and long-term reliability. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a execute setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5024 Condenser Stages Single Furnace Model S8X1B040M2PSCA Furnace Stages Single Furnace Capacity (BTU) 40k Furnace Cabinet Size B Heat Source Gas Coil Model 5TXCB003 Coil Cabinet Size B AHRI 215473402 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$12,077.85
Experience efficient and reliable comfort with a complete Trane Gas HVAC Configuration from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, designed for stable year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet execution for reliable performance in extreme temperatures. S8X2 Gas Furnace: Provides energy-efficient heating with a two-stage gas valve for better temperature control and quieter operation, ensuring dependable warmth during peak demand. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5024 Condenser Stages Single Furnace Model S8X2A040M3PSCA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 215473360 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$12,608.30
Experience the ideal balance of efficiency and reliability with a complete Trane Gas HVAC System offered by McKinney HVAC. Featuring a powerful air conditioner, a reliable gas furnace, and a high-performance indoor coil, this system ensures year-round well-being with consistent heating and cooling while maximizing energy efficiency and durability. What's Included: 5TTR50 Air Conditioner Designed for high-efficiency cooling and quiet operation, this durable unit performs reliably even in extreme temperatures. S8V2 Gas Furnace: Provides premium comfort and efficiency with a variable-speed blower motor and two-stage gas valve, ensuring consistent temperatures, quiet running, and improved indoor air quality. It adapts to your home's needs for optimal energy savings year-round. 5TXC Coil: Enhances heat transfer in heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5024 Condenser Stages Single Furnace Model S8V2A040M3PCBA Furnace Stages Two Furnace Capacity (BTU) 40k Furnace Cabinet Size A Heat Source Gas Coil Model 5TXCA002 Coil Cabinet Size A AHRI 215473368 Refrigerant R-454B Warranty 10 Year Units, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS
$13,268.95
