What's Included: The Trane S8X1 furnace offered by McKinney HVAC delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide consistent comfort and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included elements Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating while managing energy costs. Single-Stage Heating: Ensures consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better convenience and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Fits various spaces with versatile installation options. The Trane S8X1 furnace offered by McKinney HVAC is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort. Furnace Model S8X1B060M4PSCB Capacity (BTU) 60K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local
$4,562.29
What's Included: The Trane S8X1 furnace offered by McKinney HVAC delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide stable comfort and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Deployment of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line setup Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides productive heating while managing energy costs. Single-Stage Heating: Ensures reliable, consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Allows versatile installation in various spaces. The Trane S8X1 furnace offered by McKinney HVAC is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort. Furnace Model S8X1B040M2PSCA Capacity (BTU) 40K Stages Single-Stage Cabinet Size B AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local
$4,386.12
What's Included: The Trane S8V2 furnace offered by McKinney HVAC delivers high-efficiency heating with advanced comfort features, making it ideal for residential use. With an 80% AFUE rating, it provides reliable warmth while optimizing energy use. Its variable-speed blower and two-stage heating ensure precise temperature control, quieter operation, and better indoor air quality. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included units Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Provides dependable heating with energy-conscious performance. Two-Stage Heating Adjusts heat output for improved well-being, efficiency, and consistent warmth. Variable-Speed Blower Enhances airflow control, reduces temperature swings, and boosts system performance. Durable & Reliable Design Made with premium materials for long-lasting operation and low maintenance. Versatile Installation Fits various home layouts and HVAC setups. The Trane S8V2 furnace offered by McKinney HVAC is a solid choice for homeowners seeking comfort, efficiency, and quiet operation. Paired with a Trane cooling equipment, it offers year-round climate control with optimized performance. Furnace Model S8V2A040M3PCBA Capacity (BTU) 40K Stages Variable-Speed Cabinet Size A AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local
$5,590.61
What's Included: The Trane S8X2 furnace offered by McKinney HVAC provides reliable, efficient heating for residential use. With an 80% AFUE rating, it balances energy savings and consistent warmth. Its two-stage heating and multi-speed blower improve comfort and temperature control for steady indoor climate management. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency Delivers cost-effective heating with energy savings. Two-Stage Heating Adjusts heat output for better comfort, efficiency, and quieter running. Multi-Speed Blower Improves airflow and system compatibility for balanced indoor air. Durable Construction Built with quality materials for long-lasting performance and low maintenance. Flexible Installation Fits various dwelling layouts and HVAC setups. The Trane S8X2 furnace offered by McKinney HVAC is a reliable choice for homeowners seeking efficiency and comfort. Paired with a Trane cooling system, it offers comprehensive year-round climate control. Furnace Model S8X2A040M3PSCA Capacity (BTU) 40K Stages Two-Stage Cabinet Size A AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Pieces, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace ENERGY GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local <
$4,929.96
What's Included: The Trane S8X1 furnace offered by McKinney HVAC delivers reliable heating with an 80% AFUE rating, ideal for residential use. Its single-stage heating and multi-speed blower provide consistent well-being and flexible airflow control. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard fitting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides reliable heating while managing energy costs. Single-Stage Heating: Ensures consistent warmth with simple operation. Multi-Speed Blower: Improves airflow control for better comfort and system integration. Durable Design: Built with quality components for long life and low maintenance. Compact Footprint: Fits various installation spaces. The Trane S8X1 furnace offered by McKinney HVAC is a dependable, efficient heating solution. When paired with a compatible Trane cooling system, it creates an optimized HVAC setup for year-round comfort. Furnace Model S8X1D120M5PSCC Capacity (BTU) 120K Stages Single-Stage Cabinet Size D AFUE 80% Configuration Upflow / Downflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace Electricity GUIDE LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local
$4,853.35
What's Included: The Goodman GR9S80 furnace offered by McKinney HVAC delivers reliable warming and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing resources costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a finish setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line fitting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Ensures reliable warmth with simple operation year-round. Quiet and Smooth Performance: Minimizes noise to enhance indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow setups allow versatile installation. The Goodman GR9S80 furnace offered by McKinney HVAC is a reliable, cost-effective choice for homeowners prioritizing comfort and efficiency. When paired with Goodman air conditioners or heat pumps, it provides a execute heating and cooling solution year-round. Furnace Model GR9S800403AN Capacity (BTU) 40K Stages Single-Stage Cabinet Size A Airflow Measurement (CFM) 1,200 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation
$3,345.53
What's Included: The Goodman GR9S80 furnace offered by McKinney HVAC delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and robust design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-conscious heating to reduce operating costs. Single-Stage Heating: Ensures dependable warmth with simple operation year-round. Quiet and Smooth Efficiency: Minimizes noise for enhanced indoor comfort. Resilient Steel Cabinet: Protects internal components and extends lifespan. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it offers optimized heating and cooling year-round. Furnace Model GR9S800603AN Capacity (BTU) 60K Stages Single-Stage Cabinet Size A Airflow Measurement (CFM) 1,200 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and fitting. We are not liable for fines, penalties, extra costs, or modifications due to non
$3,409.80
What's Included: The Goodman GR9S80 furnace offered by McKinney HVAC delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-conscious heating to reduce operating costs. Single-Stage Heating: Ensures dependable warmth with simple operation year-round. Quiet and Smooth Performance: Minimizes noise for enhanced indoor comfort. Robust Steel Cabinet: Protects internal components and extends furnace lifespan. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by McKinney HVAC is a reliable, cost-effective solution for homeowners seeking satisfaction and efficiency. When paired with Goodman air conditioning or heat pump systems, it delivers a complete heating and cooling solution year-round. Furnace Model GR9S800603BN Capacity (BTU) 60K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,200 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation.
$3,280.17
What's Included: The Goodman GR9S80 furnace offered by McKinney HVAC delivers reliable heating and energy efficiency, ideal for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line deployment Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Ensures reliable warmth with simple performance year-round. Quiet and Smooth Performance: Reduces noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by McKinney HVAC is a stable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it offers a complete heating and cooling solution year-round. Furnace Model GR9S800604BN Capacity (BTU) 60K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,600 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emission regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchasing and installing a furnace.
$3,441.92
What's Included: The Goodman GR9S80 furnace offered by McKinney HVAC delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and sturdy design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Offers reliable warmth with simple operation year-round. Quiet and Smooth Performance: Reduces noise for improved indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace life. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile deployment. The Goodman GR9S80 furnace offered by McKinney HVAC is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it provides a complete heating and cooling solution year-round. Furnace Model GR9S800803BN Capacity (BTU) 80K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,200 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers are responsible for ensuring compliance with all local, state, and federal rules before purchase and installation.
$3,474.06
What's Included: The Goodman GR9S80 furnace offered by McKinney HVAC delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet operation ensure dependable performance and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our fitting causes a failure, we return at no charge for diagnosis and labor. Units replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Ensures reliable warmth with simple operation year-round. Quiet and Smooth Efficiency: Minimizes noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace lifespan. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by McKinney HVAC is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it provides a complete heating and cooling solution year-round. Furnace Model GR9S800804BN Capacity (BTU) 80K Stages Single-Stage Cabinet Size B Airflow Measurement (CFM) 1,600 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation. We are not liable for
$3,538.34
What's Included: The Goodman GR9S80 furnace offered by McKinney HVAC delivers reliable heating and energy efficiency for residential use. With an 80% AFUE rating and durable design, it provides consistent warmth while managing energy costs. Its single-stage gas valve and quiet execution ensure dependable efficiency and comfort. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Furnace Kit: Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard deployment scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: 80% AFUE Efficiency: Provides consistent, energy-efficient heating to reduce operating costs. Single-Stage Heating: Offers reliable warmth with simple operation year-round. Quiet and Smooth Performance: Minimizes noise for enhanced indoor comfort. Durable Steel Cabinet: Protects internal components and extends furnace lifespan. Flexible Installation Options: Compact size and multiple airflow configurations allow versatile installation. The Goodman GR9S80 furnace offered by McKinney HVAC is a reliable, cost-effective choice for homeowners seeking comfort and efficiency. When paired with Goodman air conditioning or heat pump systems, it delivers a execute heating and cooling solution year-round. Furnace Model GR9S800804CN Capacity (BTU) 80K Stages Single-Stage Cabinet Size C Airflow Measurement (CFM) 1,600 AFUE 80% Configuration Upflow / Horizontal Left/Right Warranty 10 Year Parts, 10 Year Furnace (When Registered with OEM) RESOURCES Furnace LIMITED WARRANTY PRODUCT SPECS Disclaimer for Low NOx Furnace Compliance Certain regions, including California, have strict Low NOx (Nitrogen Oxides) emissions regulations for furnaces. Customers must ensure compliance with all local, state, and federal rules before purchase and installation.
$3,427.13
