Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-conscious operation for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after mounting If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any added work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML180UH090E60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215581800 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$9,836.78
Lennox is a trusted leader in home comfort, delivering high-functionality HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your dwelling comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, providing reliable performance, improved airflow, and fuel-efficient operation for standard-efficiency needs. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML180UH090E60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-60C Coil Cabinet Size C AHRI 215581427 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$9,698.83
Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, fuel-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, offering dependable comfort, lower fuel use, and quiet operation in a compact design. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC setup by professionals, along with the Install Kit for a finalize setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML196UH090XE48C Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215581814 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,546.70
Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your residence comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, fuel-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, offering dependable comfort, lower energy use, and quiet operation in a compact design. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for reliable functionality. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing supplementary is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Components replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML196UH090XE48C Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-60C Coil Cabinet Size C AHRI 215581441 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,408.75
Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential thermal and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering stable airflow, improved temperature control, and quieter operation for enhanced comfort. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for trustworthy performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of mounting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML180UH110V60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 110K Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215581804 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,223.50
Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for dependable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering consistent airflow, improved temperature control, and quieter operation for enhanced comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of fitting. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM components warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-048 Condenser Stages Single Furnace Model ML180UH110V60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 110K Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-60C Coil Cabinet Size C AHRI 215581430 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,085.55
Lennox is a trusted leader in home comfort, offering high-operation HVAC systems that combine efficiency, reliability, and innovation. Designed for resources savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, offering reliable performance, improved airflow, and energy-efficient running for standard-efficiency needs. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Setup of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our mounting causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-060 Condenser Stages Single Furnace Model ML180UH090E60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215582653 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,309.43
Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, power-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHE Furnace: The Lennox ML180UHE is an 80% AFUE single-stage gas furnace with a constant torque ECM blower motor, delivering reliable performance, improved airflow, and energy-conscious execution for standard-efficiency needs. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations, built for durability and corrosion resistance, pairing well with Lennox air conditioners and heat pumps for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after fitting If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing added is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-060 Condenser Stages Single Furnace Model ML180UH090E60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 88k Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-60C Coil Cabinet Size C AHRI 215582579 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,171.49
Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top standards in residential heating and cooling. Whether upgrading or installing new, Lennox offers advanced solutions to keep your dwelling comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, offering dependable comfort, lower power use, and quiet operation in a compact design. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our deployment causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-060 Condenser Stages Single Furnace Model ML196UH110XE60C Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 110K Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215582663 Refrigerant R-454B Warranty 10 Year Components, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$11,193.11
Lennox is a trusted leader in property satisfaction, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Designed for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser delivering reliable, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML196UH Furnace: The Lennox ML196UH is a high-efficiency, 96% AFUE single-stage gas furnace with a constant torque ECM motor, providing dependable comfort, lower energy use, and quiet operation in a compact design. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations, built for durability and corrosion resistance. It pairs well with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will evaluate on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of setup. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-060 Condenser Stages Single Furnace Model ML196UH110XE60C Furnace Stages Single Furnace Efficiency 96% Furnace Capacity (BTU) 110K Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-60C Coil Cabinet Size C AHRI 215582591 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$11,055.15
Lennox is a trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox offers advanced solutions to keep your home comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser designed for reliable, energy-efficient cooling. Built with a durable cabinet and optimized for 14.3 SEER2 systems, it suits standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, providing consistent airflow, better temperature control, and quieter operation for improved well-being. CK40HT Evaporator Coil: The Lennox CK40HT is a high-efficiency, all-aluminum cased coil for horizontal applications. Durable and corrosion-resistant, it pairs well with Lennox air conditioners and heat pumps for trustworthy performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included pieces Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM units warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-060 Condenser Stages Single Furnace Model ML180UH110V60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 110K Furnace Cabinet Size C Heat Source Gas Coil Model CK40HT-51/61C Coil Cabinet Size C AHRI 215582657 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,696.16
Lennox is a trusted leader in home comfort, offering high-performance HVAC systems that combine efficiency, reliability, and innovation. Crafted for energy savings and durability, Lennox products meet top residential heating and cooling standards. Whether upgrading or installing new, Lennox provides advanced solutions to keep your property comfortable year-round. What's Included: MLKC1 Condenser: The Lennox MLKC1 is a single-stage air conditioner condenser built for reliable, energy-efficient cooling. It features a durable cabinet and is optimized for 14.3 SEER2 systems, ideal for standard residential use. ML180UHV Furnace: The Lennox ML180UHV is an 80% AFUE single-stage furnace with a variable-speed blower motor, offering consistent airflow, improved temperature control, and quieter operation for enhanced comfort. CK40CT Evaporator Coil: The Lennox CK40CT is an all-aluminum cased coil for upflow/downflow installations, crafted for durability and corrosion resistance. It pairs well with Lennox air conditioners and heat pumps for reliable performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Condenser Model ML14KC1-060 Condenser Stages Single Furnace Model ML180UH110V60C Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 110K Furnace Cabinet Size C Heat Source Gas Coil Model CK40CT-60C Coil Cabinet Size C AHRI 215582583 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT BROCHURE
$10,558.20
