Experience efficient and reliable comfort with a complete Trane Gas HVAC System from McKinney HVAC. This system includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, engineered for consistent year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with durable, quiet operation for reliable performance in extreme temperatures. S9X1 Gas Furnace Provides powerful, consistent heating with a high-efficiency single-stage gas valve and durable Trane construction, enhancing power savings and indoor comfort. 5TXC Coil: Optimizes heat transfer for heating and cooling with corrosion-resistant construction for long-lasting reliability. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard mounting scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, substitution, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after setup If any of the above are needed for your dwelling, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5060 Condenser Stages Single+ Furnace Model S9X1C080U5PSBA Furnace Stages Single Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215476992 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Experience efficient and stable ease with a complete Trane Gas HVAC Equipment from McKinney HVAC. It includes a powerful air conditioner, a dependable gas furnace, and a high-performance indoor coil, built for year-round heating and cooling with energy efficiency and durability. What's Included: 5TTR50 Air Conditioner High-efficiency cooling with quiet, reliable operation even in extreme temperatures. S9V2 Gas Furnace: Offers efficient, ultra-quiet heating with a variable-speed blower and two-stage gas valve. Its compact, insulated cabinet is ENERGY STAR® certified for optimal airflow and energy savings. 5TXC Coil: Enhances heat transfer for heating and cooling with corrosion-resistant construction for long-lasting performance. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5 -Ton Bundle Cooling Efficiency (SEER2) 15 Condenser Model 5TTR5060 Condenser Stages Single+ Furnace Model S9V2C080U5VSBB Furnace Stages Two Furnace Capacity (BTU) 80k Furnace Cabinet Size C Heat Source Gas Coil Model 5TXCC009 Coil Cabinet Size C AHRI 215830989 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS PRODUCT SPECS  

Read more less

Discover premium comfort with the Trane Heat Pump System offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This system delivers excellent performance and resources efficiency, ideal for larger homes or spaces needing strong climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high energy efficiency and quiet execution. Built for durability and reliable operation in all weather, it ensures steady comfort year-round. 5TEM6V Air Handler: Features a variable-speed blower motor for better humidity control, quieter operation, and improved energy efficiency. BAYHTR Heat Kits: Provides electric heat backup for extra warmth during cold months, ensuring reliable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5018 Heat Pump Condenser Stages Single Air Handler Model 5TEM4B02AC21SA Air Handler Stages Single Air Handler Capacity (BTU) 18k-24k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1505BRK* Heat Kit Output 5 kW AHRI 215610905 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

Discover premium satisfaction with the Trane Heat Pump System offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This setup delivers excellent performance and energy efficiency, ideal for larger homes or spaces needing strong climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high electricity efficiency and quiet operation. Built for durability and reliable performance in all weather, it ensures consistent comfort year-round. 5TEM6V Air Handler: Features a variable-speed blower motor for better humidity control, quieter running, and improved energy efficiency. BAYHTR Heat Kits: Provides electric heat backup for extra warmth during cold months, ensuring reliable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (regular thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 1.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5018 Heat Pump Condenser Stages Single Air Handler Model 5TEM6B02AV21SA Air Handler Stages Single Air Handler Capacity (BTU) 18k-24k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1505BRK* Heat Kit Output 5 kW AHRI 215610909 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL  

Read more less

Discover premium comfort with the Trane Heat Pump System offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This system delivers excellent performance and energy efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high energy efficiency and quiet operation. Built for durability and reliable performance in all weather, it ensures consistent year-round comfort. 5TEM6V Air Handler: Features a variable-speed blower motor for better humidity control, quieter execution, and improved energy efficiency. BAYHTR Heat Kits: Offers electric heat backup for extra warmth during cold months, ensuring reliable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (conventional composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will evaluate on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM pieces warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5036 Heat Pump Condenser Stages Single Air Handler Model 5TEM6D04AV31SA Air Handler Stages Single Air Handler Capacity (BTU) 24k-42k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1510BRKC Heat Kit Output 10KW AHRI 214074335 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

Discover premium comfort with the Trane Heat Pump System offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This system delivers excellent performance and energy efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high energy efficiency and quiet function. Built for durability and reliable performance in all weather, it ensures steady comfort year-round. 5TEM6 Air Handler: With a multi-speed blower, it delivers enhanced airflow, consistent temperature control, and quiet operation. Its all-aluminum coil offers long-lasting efficiency and corrosion resistance for excellent performance. BAYHTR Heat Kits: Electric heat backup provides additional warmth during colder months, ensuring reliable execution when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5024 Heat Pump Condenser Stages Single Air Handler Model 5TEM6B03AV21SA Air Handler Stages Single Air Handler Capacity (BTU) 18k-30k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1508BRK Heat Kit Output 8 kW AHRI 215610913 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL  

Read more less

Discover premium comfort with the Trane Heat Pump System offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This system delivers excellent performance and energy efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high energy efficiency and quiet operation. Built for durability and reliable performance in all weather, it ensures consistent comfort year-round. 5TEM6V Air Handler: Features a variable-speed blower motor for better humidity control, quieter running, and improved energy efficiency. BAYHTR Heat Kits: Provides electric heat backup for extra warmth during colder months, ensuring reliable performance when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full equipment start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 2 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5024 Heat Pump Condenser Stages Single Air Handler Model 5TEM4B03AC31SA Air Handler Stages Single Air Handler Capacity (BTU) 18k-30k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1508BRK Heat Kit Output 8 kW AHRI 214077479 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

Discover premium well-being with the Trane Heat Pump Equipment offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This system delivers excellent performance and fuel efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high energy efficiency and quiet operation. Built for durability and reliable performance in all weather, it ensures consistent comfort year-round. 5TEM6 Air Handler: Incorporates a multi-speed blower for enhanced airflow, consistent temperature control, and quiet operation. Its all-aluminum coil offers long-lasting efficiency and corrosion resistance. BAYHTR Heat Kits: Electric heat backup for extra warmth during colder months, ensuring reliable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full configuration start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5042 Heat Pump Condenser Stages Single Air Handler Model 5TEM4D06AC41SA Air Handler Stages Single Air Handler Capacity (BTU) 36k-48k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1510BRKC Heat Kit Output 10KW AHRI 215610949 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

Discover premium comfort with the Trane Heat Pump System offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, versatile 5TEM6 air handler, and efficient BAYHTR15 heat kit. This system delivers excellent performance and energy efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides dependable heating and cooling with high power efficiency and quiet operation. Built for durability and stable comfort in all weather. 5TEM6V Air Handler: Features a variable-speed blower motor for better humidity control, quieter execution, and improved energy efficiency. BAYHTR Heat Kits: Electric heat backup for extra warmth during cold months, ensuring reliable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any further work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 3 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5036 Heat Pump Condenser Stages Single Air Handler Model 5TEM4D04AC31SA Air Handler Stages Single Air Handler Capacity (BTU) 24k-42k Air Handler Cabinet Size D Heat Source Electric Heat Kit Model BAYHTR1510BRKC Heat Kit Output 10KW AHRI 215610935 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

Trane is a globally trusted leader in home comfort, delivering high-performance HVAC systems that combine efficiency, reliability, and innovation. Focused on energy savings and durability, Trane products meet top residential heating and cooling standards. Whether upgrading or installing new, Trane provides advanced solutions to keep your home comfortable year-round. What's Included: 5TWR Heat Pump Condenser: Provides reliable heating and cooling with high energy efficiency and quiet operation. Built for durability and consistent comfort in all weather. 5TEM4 Air Handler: Features a multi-speed blower for superior airflow, consistent temperature control, and quiet operation. Its all-aluminum coil offers long-lasting efficiency and corrosion resistance. BAYHTR Heat Kit: Provides supplemental electric heating for reliable warmth during colder months, ensuring year-round satisfaction. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, substitution, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any supplementary work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 2.5-Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5030 Heat Pump Condenser Stages Single Air Handler Model 5TEM4B03AC31SA Air Handler Stages Single Air Handler Capacity (BTU) 18k-30k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1508BRK AHRI Number 215610921 Refrigerant R-454B Warranty 10 Year Components, 10 Year Compressor (When Registered with OEM)

Read more less

Discover premium comfort with the Trane Heat Pump System offered by McKinney HVAC, featuring the reliable 5TWR heat pump condenser, the versatile 5TEM6 air handler, and the efficient BAYHTR15 heat kit. This system delivers excellent performance and energy efficiency, ideal for larger homes or spaces needing robust climate control. What's Included: 5TWR40 Heat Pump Condenser: Provides reliable heating and cooling with high energy efficiency and quiet operation. Built for durability and consistent comfort in all weather. 5TEM6V Air Handler: Features a variable-speed blower motor for better humidity control, quieter operation, and improved energy efficiency. BAYHTR Heat Kits: Provides electric heat backup for extra warmth during cold months, ensuring reliable operation when outdoor temperatures drop. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Heat Pump System Kit(Condenser & Coil + Air Handler) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line (outdoor) filter drier, locking caps, ArmaFlex insulation Refrigerant line (indoor) bi-flow filter drier, ArmaFlex insulation Drainage & safety secondary drain pan, float switch, P-trap PVC fittings couplings, elbows, adapters for condensate line Not Included: This listing covers the equipment and regular installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line mounting Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and supply a written change-order quote before any additional work begins. Nothing further is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page.   Bundle Size/Tonnage 2.5 -Ton Bundle Cooling Efficiency (SEER2) 15 Heat Pump Condenser Model 5TWR5030 Heat Pump Condenser Stages Single Air Handler Model 5TEM6B03AV21SA Air Handler Stages Single Air Handler Capacity (BTU) 18k-30k Air Handler Cabinet Size B Heat Source Electric Heat Kit Model BAYHTR1508BRK Heat Kit Output 8 kW AHRI 214077703 Refrigerant R-454B Warranty 10 Year Parts, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Air Handler Heat Kit LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT MANUAL INSTALL INSTRUCTIONS

Read more less

The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable gas furnace, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium homes. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4B: A single-stage, R-32 refrigerant air conditioner with a durable Copeland® compressor, aluminum fin coil, and factory-installed filter drier. Its compact, quiet design suits residential use. GR9S80 Gas Furnace: Features a single-stage gas valve for consistent, energy-efficient heating. Built for reliable performance and comfort in cold weather. Goodman CHPTA Evaporator Coil: An all-aluminum coil for horizontal applications, offering durable, efficient performance with an insulated, compact cabinet that reduces energy loss and noise. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a perform setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Gas system Kit (Condenser & Coil + Furnace) Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Gas line gas flex hose, gas pipe fittings (nipples, unions, shut-off, drip leg) Venting flue pipe & elbow set for furnace exhaust Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after deployment If any of the above are needed for your home, our technician will assess on-site and deliver a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty: Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty (10 years when registered). Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Key Features: Energy Efficiency: Lowers energy use and operating costs without sacrificing comfort. Durable Efficiency: Built with Goodman s quality standards for reliable operation and long system life. Quiet Operation: Minimizes noise for a peaceful indoor and outdoor environment. Seamless Compatibility: Designed for easy installation and integration, providing a complete heating and cooling solution. This Goodman system offers a dependable, cost-effective way to maintain year-round comfort. The condenser, furnace, and coil work together to deliver energy-efficient cooling, reliable heating, and improved heat transfer for an ideal indoor environment.   Bundle Size/Tonnage 1.5-Ton Bundle Cooling Efficiency (SEER2) 14.3 Seer2 Condenser Model GLXS4BA1810 Condenser Stages Single Furnace Model GR9S800603BN Furnace Stages Single Furnace Efficiency 80% Furnace Capacity (BTU) 60K Furnace Cabinet Size B Heat Source Gas Coil Model CHPTA1822B3 Coil Cabinet Size B AHRI 215214586 Refrigerant R-32 Warranty 10 Year Elements, 10 Year Compressor (When Registered with OEM) RESOURCES Condenser Furnace Coil LIMITED WARRANTY LIMITED WARRANTY  

Read more less