Condenser/Coil Bundle

78 products

  • Goodman GLXS4 - 4 Ton - 14.3 SEER2 AC with CAPTA6030C3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 4 Ton - 14.3 SEER2 AC with CAPTA6030C3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CAPTA6030C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Stage Coil Model CAPTA6030C3 Coil Cabinet Size C Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $6,284.04

  • Goodman GLXS4 - 2 Ton - 14.3 SEER2 AC with CAPTA2422A3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 2 Ton - 14.3 SEER2 AC with CAPTA2422A3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA2410 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CAPTA2422A3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA2410 Condenser Stages Single Stage Coil Model CAPTA2422A3 Coil Cabinet Size A Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $5,194.87

  • Goodman GLXS4 - 4 Ton - 14.3 SEER2 AC with CHPTA4830C3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 4 Ton - 14.3 SEER2 AC with CHPTA4830C3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CHPTA4830C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 4 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA4810 Condenser Stages Single Stage Coil Model CHPTA4830C3 Coil Cabinet Size C Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $6,229.86

  • Goodman GLXS4 - 1.5 Ton - 14.3 SEER2 AC with CHPTA1822B3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 1.5 Ton - 14.3 SEER2 AC with CHPTA1822B3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA1810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CHPTA1822B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA1810 Condenser Stages Single Stage Coil Model CHPTA1822B3 Coil Cabinet Size B Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $5,102.39

  • Goodman GLXS4 - 3.5 Ton - 14.3 SEER2 AC with CHPTA4230C3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 3.5 Ton - 14.3 SEER2 AC with CHPTA4230C3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA4210 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CHPTA4230C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA4210 Condenser Stages Single Stage Coil Model CHPTA4230C3 Coil Cabinet Size C Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $6,003.81

  • Goodman GLXS4 - 2.5 Ton - 14.3 SEER2 AC with CAPTA3626B3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 2.5 Ton - 14.3 SEER2 AC with CAPTA3626B3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CAPTA3626B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Stage Coil Model CAPTA3626B3 Coil Cabinet Size B Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $5,405.98

  • Goodman GLXS4 - 3 Ton - 14.3 SEER2 AC with CAPTA3626C3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 3 Ton - 14.3 SEER2 AC with CAPTA3626C3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3610 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CAPTA3626C3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 3 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA3610 Condenser Stages Single Stage Coil Model CAPTA3626C3 Coil Cabinet Size C Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $5,641.37

  • Goodman GLXS4 - 2.5 Ton - 14.3 SEER2 AC with CHPTA3026B3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 2.5 Ton - 14.3 SEER2 AC with CHPTA3026B3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA3010 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CHPTA3026B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA3010 Condenser Stages Single Stage Coil Model CHPTA3026B3 Coil Cabinet Size B Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $5,360.21

  • Goodman GLXS4 - 2 Ton - 14.3 SEER2 AC with CHPTA2426B3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 2 Ton - 14.3 SEER2 AC with CHPTA2426B3 Fan Coil - Single-Stage - Horizontal - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA2410 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CHPTA2426B3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 2 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA2410 Condenser Stages Single Stage Coil Model CHPTA2426B3 Coil Cabinet Size B Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $5,257.45

  • Goodman GLXS4 - 1.5 Ton - 14.3 SEER2 AC with CAPTA2422A3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    Goodman Goodman GLXS4 - 1.5 Ton - 14.3 SEER2 AC with CAPTA2422A3 Fan Coil - Single-Stage - Up-flow - Condenser and Coil - with install

    The Goodman HVAC system offered by McKinney HVAC combines an energy-efficient condenser, a reliable heating component, and a high-performance evaporator coil to provide consistent heating and cooling for small to medium-sized homes in McKinney, TX. Engineered for durability and comfort, it ensures year-round indoor climate control. What's Included: Goodman GLXS4BA1810 Condenser: Goodman GLXS4B single-stage air conditioner rated up to 15.2 SEER2, with an energy-efficient compressor, copper tube/enhanced aluminum-fin coil, and factory-installed filter drier. Goodman CAPTA2422A3 Evaporator Coil: Goodman CHPTA/CAPTA cased upflow/downflow/horizontal evaporator coil with internal TXV, all-aluminum construction, and an insulated, compact cabinet for space-limited installations. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC P-trap, full PVC fittings kit (couplings, elbows, tee, adapters) Not Included: This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the conventional disconnect Ductwork modifications, repairs, replacement, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Gas line extension, re-routing, or new gas line installation Condensate drain line rework beyond the immediate connection at the unit Thermostat upgrades (standard thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, your technician will note it on your estimate before work begins. SPECIFICATIONS Bundle Size/Tonnage 1.5 Ton Bundle Cooling Efficiency (SEER2) 14.3 SEER2 Condenser Model GLXS4BA1810 Condenser Stages Single Stage Coil Model CAPTA2422A3 Coil Cabinet Size A Refrigerant R-32 Warranty 10-Year Parts (When Registered with OEM) RESOURCES Condenser Coil LIMITED WARRANTY LIMITED WARRANTY SPEC SHEET SPEC SHEET

    $5,058.49

  • Cooper & Hunter PEAQ - 5-Ton - 15.2 SEER2 - Variable-Speed - Condenser and Coil Bundle with Install

    Cooper & Hunter Cooper & Hunter PEAQ - 5-Ton - 15.2 SEER2 - Variable-Speed - Condenser and Coil Bundle with Install

    Cooper & Hunter engineers reliable, high-efficiency HVAC systems built on proven inverter technology. The PEAQ series delivers variable-speed comfort, strong SEER2 performance, and straightforward serviceability at a value-driven price point. Backed by a growing U.S. dealer network, Cooper & Hunter is a smart choice for homeowners who want modern efficiency without the premium price tag. What's Included: Cooper & Hunter PEAQ Condenser (CH-PQ55-230VO): Variable-speed inverter air conditioning condenser rated up to 15.2 SEER2, engineered for quiet, efficient cooling. Cooper & Hunter PEAQ Evaporator Coil (CH-ACL48-60D): Precision-matched coil for reliable capacity and airflow with the PEAQ condenser. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Install Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC condensate P-trap and drain fittings Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty. Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 5-Ton Cooling Efficiency (SEER2) 15.2 Condenser Model CH-PQ55-230VO Coil Model CH-ACL48-60D AHRI Rated Capacity (BTU) 4430 Warranty 10 Year Parts (When Registered with OEM) RESOURCES Condenser Coil MANUFACTURER SITE MANUFACTURER SITE LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS McKinney HVAC provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in McKinney, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

    $10,979.79

  • Cooper & Hunter PEAQ - 4-Ton - 14.5 SEER2 - Variable-Speed - Condenser and Coil Bundle with Install

    Cooper & Hunter Cooper & Hunter PEAQ - 4-Ton - 14.5 SEER2 - Variable-Speed - Condenser and Coil Bundle with Install

    Cooper & Hunter engineers reliable, high-efficiency HVAC systems built on proven inverter technology. The PEAQ series delivers variable-speed comfort, strong SEER2 performance, and straightforward serviceability at a value-driven price point. Backed by a growing U.S. dealer network, Cooper & Hunter is a smart choice for homeowners who want modern efficiency without the premium price tag. What's Included: Cooper & Hunter PEAQ Condenser (CH-PQ48-230VO): Variable-speed inverter air conditioning condenser rated up to 14.5 SEER2, engineered for quiet, efficient cooling. Cooper & Hunter PEAQ Evaporator Coil (CH-ACL48-60D): Precision-matched coil for reliable capacity and airflow with the PEAQ condenser. Includes licensed and insured HVAC installation by professionals, along with the Install Kit for a complete setup. Professional Installation: Removal & haul-off of existing equipment Installation of new equipment and all included parts Refrigerant line connection, evacuation & charge to OEM spec Full system start-up, airflow check & operational testing Permit pulled and permit fees paid with the local jurisdiction Final inspection and job-site clean-up Performed by a licensed, insured HVAC contractor Condenser & Coil Install Kit Electrical & mounting disconnect, A/C whip, condenser pad Refrigerant line filter drier, locking caps, ArmaFlex insulation Drainage & PVC condensate P-trap and drain fittings Not Included This listing covers the equipment and standard installation scope above. The following items are not included unless specifically listed on your written invoice or estimate: Electrical panel upgrades or new breakers beyond the standard disconnect Ductwork modifications, repairs, swap, or new runs New refrigerant line set (existing line set is reused when in good condition) Condenser pad re-pour, raised platform, or hurricane tie-downs (standard composite pad is included) Condenser relocation to a new exterior position Crane or rooftop rigging for difficult equipment access Thermostat upgrades (basic thermostat reuse only) Asbestos abatement, mold remediation, or hazardous material handling Carpentry, drywall, paint, or flooring repair after installation If any of the above are needed for your home, our technician will assess on-site and provide a written change-order quote before any additional work begins. Nothing extra is charged or performed without your written approval. 5-Year Labor Warranty Labor is covered for 5 years from the date of installation. If a covered defect related to our installation causes a failure, we return at no charge for diagnosis and labor. Parts replacements are handled under the OEM parts warranty. Excludes maintenance, filter changes, customer-caused damage, and acts of nature. Full terms on the Warranty & Guarantee page. Bundle Size/Tonnage 4-Ton Cooling Efficiency (SEER2) 14.5 Condenser Model CH-PQ48-230VO Coil Model CH-ACL48-60D AHRI Rated Capacity (BTU) 3922 Warranty 10 Year Parts (When Registered with OEM) RESOURCES Condenser Coil MANUFACTURER SITE MANUFACTURER SITE LIMITED WARRANTY LIMITED WARRANTY PRODUCT SPECS PRODUCT SPECS McKinney HVAC provides quality HVAC equipment, parts, and accessories for residential and light commercial heating, cooling, and ventilation systems in McKinney, TX. With trusted brands and expert support, we simplify your HVAC needs by delivering reliable products and dependable service you can count on.

    $10,030.74

Footer image

© 2026 McKinney HVAC

    • Ach Direct Debit
    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account